Fridge Accessories

Product Gategory

Fridge Accessories

  • Condenser


    1. High efficient forced air cooled type condenser, high heat exchanging capacity, low power cost

    2. Suitable for medium/high temperature, low temperature, super low temperature

    3. Suitable for refrigerant R22, R134a, R404a, R507a

    4. Standard configure of standard forced air-cooled condensing unit: compressor, oil pressure relief valve(except series of semi hermetic recips) , air cooling condenser, stock solution device, drying filter equipment, instrument panel, b5.2 refrigeration oil, shielding gas; bipolar machine has intercooler.

  • Wheel


    1. Type:Refrigerator Parts

    2. Material:ABS+Iron

    3. Usage:Freezer,refrigerator

    4. Steel wire diameter:3.0-4.0mm

    5. Size:2.5inch

    6. Application: chest freezer,kitchen equipment,stainless steel equipment,upright chiller

  • Temperature controller(Themostat)

    Temperature controller(Themostat)

    1. Light control

    2. Manual/automatic defrost by turning off

    3. Time/temp. seting to end defrost

    4. Re-start delay

    5. Relay output :1HP(compressor)

  • Compressor


    1. Using R134a

    2. Compactness structure with small and light, because without reciprocating device

    3. Low noise ,High efficiency with big cooling capacity and low power consumption

    4. Copper Aluminum bundy tube

    5. With start starting capacitor

    6. Stable operating,more easy to maintain and longer service life which design to reach at 15 years

  • Fan motor

    Fan motor

    1. The ambient temperature of the shaded-pole fan motor is -25°C~+50°C, the insulation class is class B, protection grade is IP42, and it has widely used in condensers,evaporators and other equipment.

    2. There is a ground line in each motor.

    3. Motor has impedeance protection if the output is blow 10W, and we install thermal protection(130 °C ~140 °C ) to protect the motor if the output is more than 10W.

    4. There are screw holes on the end cover; bracket installation; grid installaton; flange installation; also we can customize according to your request.